Plifold
← All papercraft templates

3D papercraft models and printable nets

Build a solid paper model from a folded cube net or from profile plates and wall strips. Compare both constructions and download the matching scale drawings.

Two ways to turn a flat sheet into a solid

Start with a printable cube net with glue tabs for a blank 40 mm cube, or use the cube robot for a decorated face. Four squares wrap into the walls, then two more close the ends. A row house works differently. The shape of the roof is cut twice, and numbered wall panels set the distance between the two faces. Both constructions have a back you can test-fit before the last seam is glued.

Choose a first 3D model

For a flat-sided desk figure, use the robot’s one-page sheet. For a skyline, compare the height of the house, the clock tower and the lighthouse on their project pages before printing. For an ornament viewed from the front and side, choose the star or fir tree. Read the finished depth as well as the height. Two silhouettes with similar fronts can need very different shelf space.

Print at actual size, hold the ruler between the ends of the scale bar and try the first seam without glue. On a net, match letters at the seam. On the profile sheets, follow the edge numbers on the map. Turn to the animal templates when you want to practise bending a wall around short or inward-facing corners.

One-piece cube net

Cube robot papercraft

Build a 40 mm robot from one sheet of cardstock. Its face, side dials and back vents all fit on a single cube net.

Cars and aircraft

Papercraft car template

Make a compact car in folded cardstock. Fit the windscreen and roof before the bonnet. Dry-fit the panels around both wheel bumps with the front plate resting on a level surface.

Papercraft airplane template

Make a 90 mm passenger jet for your desk from two sheets of cardstock. Follow the top and underside maps to match the swept wings and close the tail.

Winged silhouettes

Dragon papercraft template

Make a winged dragon in folded cardstock. Dry-fit the zigzag trailing edge of the raised wing. Seat each inward corner before pressing the adjacent finger, and check that the two feet touch the same straightedge.

Night bat papercraft template

Make a night bat in folded cardstock. Work from each wingtip inward. Reverse the bend at the scallops so the wings form two matching arcs.

Architectural profiles

Clock tower papercraft template

Make a clock tower in folded cardstock. Fold from the spire toward the ledge on each side. Draw the clock face on the front before attaching it.

Lighthouse papercraft template

Make a lighthouse in folded cardstock. Crease the lantern ledges before joining the tapered tower. Leave the broad footing open to press the last tabs.

Covered bridge papercraft template

Make a covered bridge in folded cardstock. Work the underside arch from one pier to the other. Keep the two pier bases level under the roof.

Freestanding seasonal forms

Five-point star papercraft template

Make a five-point star in folded cardstock. Alternate outward tips and inward valleys. Keep the first tip open until the fifth arm lines up.

Gingerbread house papercraft template

Make a gingerbread house in folded cardstock. Close the short valley beside the chimney before the roof slope. Add icing details while the wall plates lie flat.

Winter bell papercraft template

Make a winter bell in folded cardstock. Fit the clapper at the lower edge before sealing the lip. Work the small top loop while the back is open.