Waterfall photo flip insert
Three hinged photo cards overlap down a backing page. Lift them in sequence to read a short caption under each image.
- Method
- Pockets and inserts
- Main cut size
- 84 × 130 mm
- Print size
- A4 or US Letter at 100%
Materials and tools
- 140–160 gsm backing stock, three copies of the flip card, three small photo copies and a glue stick.
Step by step
- Cut three identical cards Cut the backing. Trace the small card three times and score each one 8 mm down from its top. Fold this short strip behind the picture area.
- Space the hinges On the backing mark 10, 35 and 60 mm down from the top. Centre each card horizontally. Begin with the lowest, gluing only its short folded tab at the matching mark.
- Label the sequence Add a picture to each front and a caption under its free area. Let the glue dry with the cards lifted slightly, then lower the cards from the bottom upward.
Check the finished piece
Lift the top, middle and bottom cards independently. A card that lifts its neighbour has stray glue or a picture bridging the gap between the hinges.
This pattern has a digital scale drawing. An independent paper build is pending.