Plifold
← Junk journals

Double tuck spot journal page

Two narrow edge pockets face inward on a flat backing. They hold opposite ends of a removable landscape note.

Method
Pockets and inserts
Main cut size
142 × 100 mm
Print size
A4 or US Letter at 100%
Measured pattern for double tuck spot journal page, including the main piece and its matching insert.
Printable cutting and folding layout. The separate guide or insert is drawn at the same scale as the main piece.

Materials and tools

Step by step

  1. Turn in the sides Fold both 27 mm wings onto the 88 mm middle panel. They leave an open strip of the backing visible between them.
  2. Anchor the pocket ends Put a thin line of glue on the top and bottom edge of each wing. Leave both inward-facing vertical edges loose. Dry with a clean scrap between the wings and backing.
  3. Tuck the note Bow the note gently to slip its ends into both openings. Glue the reverse of the backing to a journal page, far enough from the spine to reach both sides.

Check the finished piece

The note should stay put when the page turns. For a thinner slip, deepen its engagement on one side before sliding it back toward the centre.

This pattern has a digital scale drawing. An independent paper build is pending.

Related projects

Mini postcard hinge albumLibrary card pocket for a junk journalWaterfall photo flip insert