Plifold
← Junk journals

Index tab divider for a pocket journal

Give a small insert a projecting, doubled tab. Make several dividers from different paper scraps and stagger their tabs along the fore-edge.

Method
Pockets and inserts
Main cut size
82 × 116 mm
Print size
A4 or US Letter at 100%
Measured pattern for index tab divider for a pocket journal, including the main piece and its matching insert.
Printable cutting and folding layout. The separate guide or insert is drawn at the same scale as the main piece.

Materials and tools

Step by step

  1. Size the divider Cut the backing and check it inside your notebook. Trim the top or bottom if it rubs the cover, keeping one edge straight for the tab.
  2. Place the tab Fold the small strip at its centre. On the divider mark where the first label should sit. Slip the tab over that edge, leaving about 8 mm projecting beyond it.
  3. Fix and label Glue the overlapping portions of the tab to both faces of the divider and glue the projecting halves together. Add a short label on both sides. Repeat with the next tab lower down.

Check the finished piece

Close the journal with the divider inserted. If a tab bends under its cover, trim its projection or shift it to the top edge instead.

This pattern has a digital scale drawing. An independent paper build is pending.

Related projects

Mini postcard hinge albumLibrary card pocket for a junk journalDouble tuck spot journal page