Field notes pocket journal
Make a 90 × 120 mm field notebook with a pocket for one ticket, pressed-paper scrap or handwritten tag.
- Difficulty
- Easy hand sewing
- Cover
- 120–160 gsm
- Finished size
- 90 × 120 mm

Materials and tools
- Printed cover and tag sheet, two inner leaves of 75–100 gsm paper, a clean offcut or ticket, scissors, glue, needle and about 35 cm of thread.
Step by step
- Cut the cover and two leaves. Print at 100% and check the 25 mm bar. Cut the cover from page 1. Use page 2 twice, or trace one leaf onto scrap paper. Each open sheet is 180 × 120 mm.
- Nest and bind the fold. Fold each sheet in half, place the two leaves inside the cover and align the spines. Pierce the three dots through the fold. Use the three-hole stitch below, keeping the knot inside.
- Fit the pocket and tag. Cut out the pocket and tag. Fold the two side tabs and bottom tab behind the pocket. Glue only those tabs to the inside back cover, leaving the top open. Slide the tag in after the glue sets.
- Build one field-notes spread. On the left, date a note about one place. On the right, attach one flat scrap with room to write where you found it. Open the spread flat and check that the pocket clears the spine.