Vintage letter junk journal folio
Keep a transcription beside its source in a three-panel letter folio. A short outer flap closes over the packet without touching the original.
- Method
- Themed journals
- Main cut size
- 174 × 108 mm
- Print size
- A4 or US Letter at 100%
Materials and tools
- 120–160 gsm cover paper, a copy of a letter, two photo corners or strips of scrap, pencil and a 22 cm length of ribbon.
Step by step
- Crease the unequal panels Cut the 174 × 108 mm rectangle. With the printed side up, fold the 46 mm right panel over the middle, then bring the 64 mm left panel over it. Open it again.
- Mount a copy Lay a letter copy across the middle panel. Make two small corner mounts from scrap and glue their outside edges to the cover. Keep adhesive off the letter.
- Record the source Write the sender, recipient and date on the separate transcription card. Tuck it under the little flap, close the wider cover over it and tie the ribbon around the closed packet.
Check the finished piece
Slide the copy out by its top edge. If it catches, lift the nearer corner mount before the glue sets. Keep an irreplaceable letter stored separately.
This pattern has a digital scale drawing. An independent paper build is pending.