Plifold
← Junk journals

Flutter book binding for a junk journal

Join folded leaves at the fore-edge so a row of double pages opens in succession. The unglued spines remain flexible.

Method
Binding methods
Main cut size
160 × 96 mm
Print size
A4 or US Letter at 100%
Measured pattern for flutter book binding for a junk journal, including the main piece and its matching insert.
Printable cutting and folding layout. The separate guide or insert is drawn at the same scale as the main piece.

Materials and tools

Step by step

  1. Prepare four leaves Cut and fold four rectangles to 80 × 96 mm. Put the fold of each leaf on the left, stack them and align their loose right-hand edges.
  2. Join neighbouring leaves Between the lower outside face of one leaf and the upper outside face of the next, glue a 6 mm strip along their loose right-hand edges. Keep all three left-hand folds free. Repeat for each neighbouring pair.
  3. Cover the ends Mount a small board on the outermost front and back faces. Keep the covers inside the margins. Let the stack dry under light, even pressure with waste paper between the openings.

Check the finished piece

Turn the doubled leaves one at a time. Separate them gently at an unglued fold to see the stepped construction. Glue that spreads inward can reduce the opening.

This pattern has a digital scale drawing. An independent paper build is pending.

Related projects

Coptic stitch binding with one needleFive-hole pamphlet stitch for a junk journalSingle-sheet eight-page junk journal zine