Plifold
← Junk journals

Concertina binding for a map journal

An unsewn accordion links four sections of a route. Open one panel as a page or spread the complete journey flat on the table.

Method
Binding methods
Main cut size
176 × 100 mm
Print size
A4 or US Letter at 100%
Measured pattern for concertina binding for a map journal, including the main piece and its matching insert.
Printable cutting and folding layout. The separate guide or insert is drawn at the same scale as the main piece.

Materials and tools

Step by step

  1. Fold the concertina Crease the three upright lines in alternating directions. Bring the 44 mm panels into a stack and level the fore-edges before sharpening all three folds.
  2. Fit the covers Cut two boards using the small pattern. Centre one on each outward end face. Glue them with an even margin around the paper so the boards cannot collide at the hinges.
  3. Map the route Open the strip flat. Sketch four stops, one per panel, and join them with a pencil route. Split any added map scrap at a hinge before gluing it down.

Check the finished piece

Close the stack from either end and lay it flat again. A stiff hinge usually has a scrap or dried glue crossing it.

This pattern has a digital scale drawing. An independent paper build is pending.

Related projects

Coptic stitch binding with one needleFive-hole pamphlet stitch for a junk journalSingle-sheet eight-page junk journal zine